yl23455永利(China)有限公司官网-Ultra Platform

On line monitoring device for transmission line tower inclination

    model：DX-WPS100-QJ

1、 Product introduction

The transmission lines are basically overhead lines. As the lines are erected in the air, they need to bear the effects of mechanical forces such as dead weight, wind, rainstorm, ice and snow, and the erosion of harmful gases such as wind sand. The operating conditions are very bad. In desert areas, high salt soil areas, goaf areas, mountain landslide areas and other unfavorable geological areas, under the action of gravity, stress and natural forces, the tower foundation is easy to deform, resulting in tower tilt, even tower collapse and disconnection, paralyzing the power supply lines, seriously affecting people's production and life, and causing huge losses. The transmission line tower tilt online monitoring device developed by our company can monitor the tower tilt in real time, understand the safety and reliability of the operating tower in a timely manner. According to the development trend of the tilt monitoring data, we can timely conduct a variety of ways of pre alarm for the tower tilt exceeding the standard, guide the overhaul and maintenance, remind the operation and maintenance personnel to strengthen the foundation, and prevent tower collapse accidents.

2、 Working principle

The host of the transmission line tower tilt online monitoring device will send the line data such as the longitudinal tilt angle, lateral tilt angle and comprehensive tilt angle of tower tilt collected by the tilt sensor to the monitoring center through 4G/5G/WIFI wireless network and power special network after digital compression and coding, and decode the convection and data signals in the monitoring center, so that the tower tilt data can be displayed on the screen directly in digital and graphic forms. The monitoring center views and observes the site conditions of each monitoring point in real time through the data monitoring client, and the maintenance and monitoring personnel analyze the tower tilt data sent from the site. In case of abnormal early warning information, they immediately make corresponding emergency treatment to ensure the safe operation of the high-voltage line.

3、 Product features

(1) Basic configuration of tower tilt monitoring: main control unit, micro meteorological monitoring unit, communication unit, power supply unit, installation support and auxiliary materials;

(2) Real time acquisition of the data of the parallel line and transverse inclination angle of the tower, and acquisition of the power supply voltage, electricity percentage and other parameters characterizing the power supply performance of the monitoring device;

(3) It can collect the communication signal strength of the location of the monitoring device;

(4) Data acquisition mode, with automatic acquisition mode and controlled acquisition mode;

(5) Data acquisition interval: according to the change characteristics of acquisition parameters, it can be set according to user requirements; The data collection interval can be set to 5 minutes, and the default time interval is 30 minutes.

(6) Real time monitoring data can be recorded and stored correctly, and event identification can be established correctly in case of abnormal device; The monitoring device can store monitoring data for at least 90 consecutive days or data not uploaded by the master station due to communication problems;

(7) Ensure the safety of the recorded data, and do not lose the recorded dynamic data due to power interruption, rapid or slow fluctuations and falls; Dynamic record data shall not be deleted due to external access; It is not allowed to delete or modify dynamic record data manually; The recorded information shall not be lost or erased.

(8) It has the automatic alarm function of monitoring functional failure, communication interruption and other abnormal conditions; It has fault alarm functions such as data exceeding alarm, device function abnormal alarm, etc., and the alarm threshold of equipment status parameters can be set.

(9) The alarm information can distinguish different types of abnormal conditions, including monitoring data, device self inspection abnormalities, etc;

(10) The alarm information shall realize real-time remote transmission, and the alarm strategy setting can be modified.

(11) Power supply unit generally includes energy acquisition unit, storage battery, controller, etc; It has the functions of automatic floating charging, overvoltage protection, undervoltage protection, overcurrent protection, temperature compensation, etc;

(12) The power module should be equipped with an independent charge and discharge controller, and the nominal voltage of the power module should be DC+12V;

(13) The battery shall be able to maintain the power supply of the monitoring device for at least 30 days of normal operation under the condition of continuous no light and no other power supplement.

4、 Technical parameters